Table of Contents
Advertisement
60-key QWERTY Keyboard
The 60-key keyboard has 101 keyboard functions, including a numeric keyboard pad. Please refer to
combinations.
The 60 key keyboard is also available with overlays designed for use with
Key Maps
The 60-key keyboard supports all 101 keyboard functions. However, because the keyboard only has 60 keys, all functions are
not visible (or printed on the keyboard). Therefore the Thor VX8 keyboard supports what is called hidden keys -- keys that are
accessible but not visible on the keyboard.
On standard keyboards many keys are found in the Alphanumeric section as well as on the Numeric keypad (i.e. the 1 key is
found on the numeric keypad and above the alpha characters on standard keyboards). However these keys send distinctly
different scan codes when the keys are pressed. The default codes for the Thor VX8 number keys correspond to the numeric
keypad on standard keyboards. In order to duplicate the codes sent when the alphanumeric key is pressed, the hidden
keystroke must be used.
The hidden keys supported by the Thor VX8 are listed in
Unused Key Functions
There are several key functions on the 60-key keyboard that are not used on the Thor VX8. These include:
nd
2
F3 – The Resume/Suspend function is not used as Microsoft Windows controls all power management modes.
l
nd
nd
2
F4 and 2
F5 – The Display Brightness functions are not used as the display brightness is adjusted by the buttons
l
on the Thor VX8.
nd
nd
2
F6 and 2
F7 – The Contrast functions are not used as the contrast is not adjustable on the TFT display on the
l
Thor VX8.
nd
nd
2
F8 and 2
F9 – The Volume control keys are not used as volume is adjusted via the Microsoft Windows Volume
l
icon in the System Tray.
nd
2
F10 – Please see below for details on toggling the keyboard backlight.
l
NumLock
The 60-key keyboard does not have a NumLock indicator or key. NumLock can be toggled On or Off using the 2
keypress sequence. Changes made to the NumLock status persist across a Windows restart.
IBM 3270
Key
Maps.
Key Maps
and
IBM 5250
terminal emulations.
for keypress
nd
SHIFT F10
2-21
Advertisement
Table of Contents
