Selecting A Radio Channel - Motorola GP388 User Manual

Selecting a Radio Channel

Your radio offers up to 255 channels, however some
may not be programmed. Check with your dealer for
more information.
Before selecting a channel ensure your radio is in
channel mode.
Note: The rotary knob default is channel mode.
The keypad default is programmable and may
be set to channel mode.
There are two ways to enter channel mode:
Method 1
Press the Channel Mode direct access button, if
programmed by your dealer.
Method 2
c to enter Menu Mode
1
+ or e until:
2
c to select
3
4 Display shows e.g.:
Note: After a short period of inactivity the radio
returns to the IDLE STATE.
18
English
Once in channel mode, there are three ways to
select a channel:
Method 1
Turn the rotary knob (1) clockwise or counterclock-
wise until you reach the desired channel indicated
on the display.
Method 2
Method 3
Channel
Chan: 05
Note: The keypad can't be used to enter the channel
+ e
1
or until:
c to confirm your selection.
2
Display shows:
(for 2 seconds)
1 Enter the desired
channel number from
the keypad, e.g. 05:
c to confirm your selection.
2
Display shows:
(for 2 seconds)
number during a call or whilst the radio is in a scan.
Channel Number
or
Alias
Selected
CH: 05
Selected