Lone Worker - Motorola GP388 User Manual

LONE WORKER

The Lone Worker feature enables you to work
alone with added safety.
You can switch On or Off Lone Worker by
using a pre-programmed Lone Worker button
or via the menu.
Using the Lone Worker Button
1.
Press the Lone Worker button to switch Lone
Worker on, when the feature enable alert will
sound and the display will show
Lone Wkr On
• You will be reminded at intervals that Lone
Worker is switched on by a high pitched alert
tone (Lone Worker Reminder) being sounded.
• Press any button to respond and cancel the
alert, if you do not the radio will enter the
Emergency state.
2.
Press the Lone Worker button again to switch
Lone Worker off, when the feature disable alert
will sound and the display will show
Lone Wkr Off
3. You may also switch off Lone Worker by chang-
ing the channel or switching radio off and on
again.
Using the Menu
1 Ensure radio is in IDLE STATE.
c
2
+
3
c
4
+
5
c
:
6
Display shows
current status e.g. :
+
7
c
8
Display shows:
(for 2 seconds)
9
Radio exits menu
:
mode and display
shows e.g.:
to enter Menu Mode.
e
or until:
Utilities
to select
e
or until:
Lone Worker
to select
Off
e
or until:
On
to select
Selected
Chan: 05
43 English