Olympus C-765 Ultra Zoom Quick Start Manual page 237

(When the camera is connected to a PC or printer.
Possible cause
The printer fails to connect.
PC was selected on
the monitor after
connecting to the
printer with a USB
cable.
The printer does not
support PictBridge.
The camera is not recognized by the PC.
The USB driver has
not been installed.
The camera has not
been turned on.
Corrective action
Remove the USB cable, and start again from step
1 of "Connecting the camera to a printer".
Refer to the printer's instruction manual or contact
the manufacturer.
It is necessary to install the USB driver for
Windows 98/98SE. For installation instructions,
see "DIGITAL CAMERA-PC CONNECTION
OPERATION MANUAL" on the CD-ROM.
Press the power switch to turn the camera on.
Troubleshooting
Ref. page
P.170
—
—
P.24
193
11