Playback On A Tv - Olympus C-765 Ultra Zoom Quick Start Manual

Playback on a TV

Use the AV cable provided with the camera to play back recorded images on
your TV. You can play back both still pictures and movies on your TV. Sounds
stored with an image are also played.
Mode dial
1
Make sure that the TV and camera are turned off. Connect
the A/V OUT jack on the camera to the Video input
terminal on the TV using the AV cable.
Connect to the TV's video input (yellow)
and audio input (white) terminals.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV's instruction
manual.
3 Set the mode dial to q and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
TIPS
• You are recommended to use the optional AC adapter when using
the camera with a TV.
• Make sure that the camera's video output signal type is the same as
the TV's video signal type. g"VIDEO OUT – Video output
Note
selection" (P.157)
• The camera's monitor or viewfinder turns off automatically when the
AV cable is connected to the camera.
• Be sure to use the AV cable provided to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
Connector cover
AV cable
A/V OUT jack (MONO)
7
125