Table of Contents
Advertisement
5Appendix A - Specifications
Physical
Dimensions
Weight
Environmental
Temperature (TAM-242)
Temperature (TAM-252)
Charging Temperature
Humidity
SAT-200 Modem
Transmit frequency
Receive frequency
GPS frequency
Elevation angle range
Transmit EIRP
Transmitter modulation
Transmit burst duration
Receiver
Receive G/T
Receiver modulation
GPS
Channels
Time To First Fix (Typical)
Accuracy (SA Off)
Altitude
Dynamic capability
Maximum update rate
Control & Monitoring
Interface
Baud rate
Parity/data bits/stop bits
2
The TAM-252 temperature specification is limited by the temperature specification of the proximity switch.
This document contains information that is proprietary and confidential to EMS Global Tracking (one or more of the following: EMS Global Tracking Ltd and EMS Technologies
Canada, Ltd), and is supplied on the express condition that it is not to be used for any purpose other than the purpose for which it was issued, nor is it to be copied or
communicated in whole or in part, to any third party other than the recipient organization, without the prior written permission of EMS Global Tracking.
MAN-0059 Issue 4
TAM-242/252/262 Installation and Operating Manual
247 mm x 178 mm x 48 mm
1.3kg
-35ºC to +55ºC
2
-20ºC to +55ºC
0ºC to +45ºC
≤ 95% @ +40ºC, non-condensing
1626.5 MHz to 1660.5 MHz
1525.0 MHz to 1559.0 MHz
1575.42 ± 1.0 MHz
0º to 90º
0 - 9dBW
2 level FSK, 256Hz tone spacing
2s or 8s
≥ -25dB/K at EL = 30º
32-ary FSK, 20Hz tone spacing
50
Cold start:
Hot start:
Position (CEP, 2D):
Maximum 12000m
Velocity:
Acceleration:
1s
Asynchronous serial RS232
9600 bps
N,8,1
© 2011 EMS Global Tracking Ltd, EMS Technologies Canada Ltd.
29s
<1s (GPS was off for less than 2 hours)
2.5m (Typical)
Maximum 310m/s
≤ 4g
Specifications
13 of 17
Advertisement
Table of Contents
