Operational Status - EMS TAM-242 Installation And Operating Manual

Installation TAM-242/252/262 Installation and Operating Manual

Operational Status

The TAM-242 is a self contained unit and as such the only checks that can be made are when
charging the battery or changing the unit's state from on to off or vice versa. In all of these cases the
LED function is as per the following table:
Operation
Normal Operation –
Position Reporting and
"Awake" to Receive
Message
Switch Off with Key
Switch
Switch On with Key
Switch
Charging
Charging
Charging
Charging
This document contains information that is proprietary and confidential to EMS Global Tracking (one or more of the following: EMS Global Tracking Ltd a nd EMS Technologies
Canada, Ltd), and is supplied on the express condition that it is not to be used for any purpose other than the purpose for which it was issued, nor is it to be copied or
communicated in whole or in part, to any third party other than the recipient organization, without the prior written permission of EMS Global Tracking.
10 of 17
LED Status
Flashing –
One second on, two
Colour seconds off for up to
indicates 10 minutes
charge level
ON Six seconds
Flashing One second on, two
seconds off for up to
10 minutes
ON – Red or
Continuous
Orange
Flashing - Red Five seconds on, three
seconds off
Flashing - Five seconds on, three
Green seconds off
ON - Green Continuous
© 2011 EMS Global Tracking Ltd, EMS Technologies Canada Ltd.
Duration
The colour indicates the
charge status, Green >90%,
Orange 25% to 90%, Red
<25%. Terminal will enter
Sleep Mode between
transmissions (no LED)
LED will remain off until the
terminal is switched on or
charged
Immediately transmits a
position report
There is a fault
Battery charge at <90%
Battery charge at >90%
Battery full
Remarks
MAN-0059 Issue 4