Bose Soundtouch Stereo JC Owner's Manual page 27

Problem
SoundTouch
™
controller response
to commands is
intermittent
There is no sound
Neither speaker
plays
Only one speaker
plays
One speaker still
does not play
Right and left
stereo channels are
heard on the wrong
speakers
Interference
What to do
• Replace the batteries.
• Move it a short distance and try again. In some buildings, you
may experience spots where the remote control will not operate
effectively.
• Make sure the cord that connects the power supply to the
Acoustimass module (which contains the remote antenna) is
®
straightened and separated from other power cords.
• Try moving the Acoustimass
vides a better response.
• Make sure the Acoustimass
the wireless adapter is connected to the Bose
• Make sure the speaker cable plugs are pushed all the way into the
Jewel Cube connectors.
®
• Make sure you have selected a source.
• Increase the system volume.
• Press the SoundTouch
• Make sure the Acoustimass
power.
• Make sure the plug is inserted fully and the AC (mains) power
outlet is powered.
• Make sure content is selected via the SoundTouch
• Disconnect the SoundTouch
Acoustimass module. Disconnect AC power from the
®
Acoustimass module for three minutes. Reconnect the
®
SoundTouch wireless adapter. Reconnect power to the
™
Acoustimass module.
®
• Check wires connected to the speaker that does not play.
• Make sure the wires are in good condition and are firmly con-
nected at both ends.
• Disconnect the wires from the speaker and from the Acoustimass
module. Disconnect the other cable from its speaker, and con-
nect that end of the cable to the speaker that does not play. If the
speaker still does not play, the problem may be in the speaker. If
the speaker now plays, continue checking for the source of the
problem.
• Disconnect the same cable from the Acoustimass
nect it to the other output on the Acoustimass
speaker plays, the problem may be in the original cable that was
connected to that speaker.
• Make sure the cable connected to the SPEAKER OUTPUTS L
at the amplifier are connected to the speaker on the left in your
listening area.
• Make sure the cable connected to the SPEAKER OUTPUTS R
at the amplifier are connected to the speaker on the right in your
listening area.
• Make sure the speaker wires are firmly inserted in the back of the
speakers and on the Acoustimass
• Make sure the SoundTouch
objects, other audio/video components, and direct heat sources.
Care and Maintenance
module a few feet to see if this pro-
®
module is plugged into power, and
®
controller screen to unpause the system.
™
module is connected to AC (mains)
®
wireless adapter cable from the
™
module connector panel.
®
wireless adapter is away from metal
™
link connector.
®
app.
™
module. Con-
®
module. If the
®
English - 27
®