What to do:
1. Connect your instrument's first pick-up to the Input socket (1) of the Lehle Parallel M.
2. Connect your instrument's second pick-up to the Return input (5) of the Lehle Parallel M.
3. Use the Return controller (10) on the Lehle Parallel M to set the sensitivity for your second pick-up.
4. Use the MIX controller (9) on the Lehle Parallel M to set the required mixing ratio for the two pick-
ups.
5. Connect your amplifier to the Output socket (6) of the Lehle Parallel M.
6. Check the overall sound for any phase cancellations and, if necessary, press the phase reverse switch
(4) on the Lehle Parallel M.
7. Done!
16