Related Manuals for Lehle Parallel M
Summary of Contents for Lehle Parallel M
-
Page 1: Operating Instructions
Lehle Parallel M Operating instructions Lehle Gitarrentechnik • Im Hundsbusch 11 • D-46562 Voerde • Tel +49 (0) 2855 850070... - Page 2 I have been building units that switch, split and route signals with no technical compromises and with maximum musical fidelity since 1999. Your new Lehle Parallel M comprises only the very best components. Every assembly of your Lehle Parallel M has been made and tested in Germany.
-
Page 3: Table Of Contents
- Lehle Parallel M for parallel effect loops ................ 9 - Using the Lehle Parallel M to insert effects into the effects loop of an amplifier....11 - Using the Lehle Parallel M to mix two input signals ............13 - Using the Lehle Parallel M to mix two pick-ups from one instrument ....... -
Page 4: Introduction
The Lehle Parallel M is a compact and versatile keyboards and active electric guitars and basses line mixer to meet demanding tonal standards. with a broad output range extending from 20 to The Lehle Parallel M mixes the signals from 100,000 Hz. -
Page 5: Technical Data
Technical data Weight: 521 g (without battery) Length: 10 cm (3.9”) Width: 12,2 cm (4.8”) Overall height: 3,9 cm (1.5”) Voltage range: 9 - 20 V AC or DC, or 9V PP3 battery Max. power take-up: 37 mA with battery, 63 mA with an extern. power supply Frequency response: 20 Hz - 100 kHz Distortion: 0,003 % at 1kHz, 0 dBU Impedance, Input: 1 MOhm... -
Page 6: General Description
General Description... - Page 7 „B”. and mixers. 3. Send socket If you want to use your Lehle Parallel M to Connect the input of your effect unit or the input inject an external effect into the serial effects loop of your target device (e.g.
- Page 8 MIX controller (9). If the Lehle Parallel M is being used to mix two Connect the output socket to the Return input pick-ups from one instrument, the Return socket...
- Page 9 20 V here, when needed. The input signal is available 1:1 on the Send input The Lehle Parallel M can be operated option- when this controller is set to its center position, ally with a 9 V PP3 battery or from an external...
- Page 10 Lehle Parallel M pedal board, for example). Thanks to its ready-to-go fixing system, the Lehle Parallel M can be mounted without difficulty on a base plate. To do this, undo the four housing screws and detach the cover. Then fix the device base to a base plate using the two screws, the washers and the spacers supplied.
-
Page 11: Typical Uses
Typical uses The Lehle Parallel M’s universal properties make it equally suitable for live use on stage and in the concert hall, and for studio recording sessions. The following few pages show a number of typical ap- plications in which the Lehle Parallel M is a rational addition to your gear! - Page 12 4. Connect the output of your effect unit to the Return socket (5) of the Lehle Parallel M. 5. Use the Send (8) and Return (10) controllers on the Lehle Parallel M to adjust the level of the effect unit connected optimally.
-
Page 13: Using The Lehle Parallel M To Insert Effects Into The Effects Loop Of An Amplifier
Using the Lehle Parallel M to insert effects into the effects loop of an amplifier SEND SEND RETURN RETURN Device connection Input socket (1) Send of the serial effects loop of an amplifier Send socket (3) Input effect unit(s) Return socket (5) ... - Page 14 4. Connect the output of your effect unit to the Return socket (5) of the Lehle Parallel M. 5. Use the Send (8) and Return (10) controllers of the Lehle Parallel M to adjust the level of the effect unit connected optimally.
-
Page 15: Using The Lehle Parallel M To Mix Two Input Signals
Using the Lehle Parallel M to mix two input signals Device connection Input socket (1) Output from first device (effect unit, PC, keyboard, mixer, instrument, etc.) Send socket (3) – Return socket (5) Output from second device (PC, keyboard, mixer, instrument, etc. – balanced signal if required) Output socket (6) ... - Page 16 3. Set the sensitivity for the second unit using the Return controller (10) on the Lehle Parallel M. 4. Set the required mixing ratio for the two units using the MIX controller (9) on the Lehle Parallel M. 5. Connect your amplifier or another target device to the Output socket (6) of the Lehle Parallel M.
-
Page 17: Using The Lehle Parallel M To Mix Two Pick-Ups From One Instrument
Using the Lehle Parallel M to mix two pick-ups from one instrument Device connection Input socket (1) Instrument’s first pick-up Send socket (3) – Return socket (5) Instrument’s second pick-up Output socket (6) Amplifier Many instruments have two different types of pick- reverse switch (4). - Page 18 3. Use the Return controller (10) on the Lehle Parallel M to set the sensitivity for your second pick-up. 4. Use the MIX controller (9) on the Lehle Parallel M to set the required mixing ratio for the two pick- ups.
-
Page 19: Using The Lehle Parallel M As A Active Di Box
2. Connect your amplifier to the Output socket (6) of the Lehle Parallel M. 3. Use the U/B mode switch (2) on the Lehle Parallel M to select whether the Send output (3) will sup- ply a balanced or an unbalanced signal (see the instructions for the U/B mode switch above). -
Page 20: Signal Flow Chart Of The Lehle Parallel M
5. Turn the MIX controller (9) on the Lehle Parallel M all the way to the right, so that you have 100 % of the original signal on the output. 6. Use the Send controller (8) on the Lehle Parallel M to set the optimum output level.