Table of Contents
Advertisement
troller (8) down slightly. Turn the Return controller
(10) up again, to increase the level back to that of
the amplifier's effects loop.
The signal will often lose warmth, intensity and
depth - everything, that makes up the unique
sound of a good tube amplifier! - when digital
What to do:
1. Connect the Send output from the serial effects loop of your amplifier to the Input socket (1) of the
Lehle Parallel M.
2. Connect the Output socket (6) of the Lehle Parallel M to the Return input of your amplifier's serial
effects loop.
3. Connect the Send socket (3) of the Lehle Parallel M to the input of your effect unit.
4. Connect the output of your effect unit to the Return socket (5) of the Lehle Parallel M.
5. Use the Send (8) and Return (10) controllers of the Lehle Parallel M to adjust the level of the effect
unit connected optimally.
6. Select the desired effect level using the MIX controller (9) on the Lehle Parallel M.
7. Done!
12
effect processors are used in a serial effects loop.
With the Lehle Parallel M, however, you can
add the effect signal to the original sound - with
the pleasing result that you lose none of your am-
plifier's excellent sound characteristics and don't
have to do without the effect sounds you love.
Advertisement
Table of Contents
