Hardware Installation - HIKVISION DS-2CD883F-E(W) Installation Manual

7
Installation Manual of Network Box Camera

2.2 Hardware Installation

Box camera can be fixed in both wall and ceiling, customers can choose different
ways to install the camera according to their specific needs. The following section
introduces the ceiling mounting, and the wall mounting follows the same way:
Step 1: Fix the camera mounting bracket to the ceiling.
Fig 2.2.1 Fix camera mounting bracket
NOTE:
If it is wall, you need to fix the expand bolt (note: the mounting hole of the expand
bolt should align with the bracket) before fixing the bracket as ① in Fig 2.2.1 . If the
wall surface is wooden, the part of ① in Fig 2.2.1 can be ignored and you can use
the self-tapping screw to directly fix the bracket. Please note that the wall on which
the camera is fixed should be able to bear at least three times the weight of the
bracket and the camera.
Step 2: Screw the mounting hole to the mounting bracket, and then adjust the
camera to the desired monitoring location and finally tighten the knob on bracket
to secure the camera to the ceiling.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©