Eeprom Initial Setting Range For Events - Olivetti PG L22 Special Service Manual

3.1.3

EEPROM Initial Setting Range for Events

As for initialization of EEPROM, ranges differ the whole phenomenon.
"O" is initialized. "–" is not initialized.
No Events
1 User Maintenance
Menu EEPROM
RESET Operation
2 F/W Revision
check error at the
time of a power
on.
3 CU EEPROM area
mapping Revision
check error at the
time of a power
on.
4 Brands area check
error at the time of
a power on.(*1)
5 Engine
Maintenance
Menu ENGINE
RESET Operation
6 PU EEPROM area
mapping check
error at the time of
a power on.
(*1) The model (forcing) which operated before is for operating as another model (forcing), and a Brands check is
recognized as an error and resets change of the Brands point by the PJL command, operation at the time of
the power supply injection by new EEPROM, etc.
(*2) It restricts to the time when whose page counter is 500 or less sheets, and is reset by 0. (ENGINE RESET by
the PJL command is not this limitation.)
(*3) Although a DOT SHIFT setting menu exists in a system maintenance menu, since setting value preservation
area is arranged at PU EEPROM AREA, even when the system maintenance menu item is initialized, a DOT
SHIFT setup is not initialized. On the contrary, when PU EEPROM AREA is initialized, a DOT SHIFT setup is
also initialized.
Y103920-3
Table 3-1 The Initial-Setting domain of EEPROM
CU EEPROM Area
Administrator Menu
Maintenance Menu
Factory User
Default Menu
Area Area
O
— —
O O
—
O O O
O O O
— — —
— — —
Service Manual
/ System
Area(*3)
F/W
Brands
Revision
Area
Area
— —
O
—
— —
O O
— —
O
— —
(*3)
PU EEPROM Area
Engine Maintenance Menu Area
Drum Page Toner Dot
Counter Counter Counter
— — —
— — —
— — —
— — —
O O O
—
(*2)
O O O
—
—
—
—
48