JVC Model DLA-HX1E Instructions Manual page 54

What to do when these messages are displayed
Message
1000h
Lamp replacement
Lamp replacement
Warning
54
When the "Lamp time" reaches 1000 hours
[ A message indicating "1000h" appears on the projected screen.
• Press [EXIT] button to delete the message.
EXIT
When the accumulated lamp time reaches between 1900 hours to 2000 hours,
"Lamp replacement" message appears on the screen each time the projec-
tor is turned on.
• Press [EXIT] button to delete the message.
[ Prepare a replacement lamp and install as quickly as possible.
EXIT
The word "Warning" appears and blinks when the accumulated lamp time
reaches 2000 hours.
The message can be cleared by pressing the [EXIT] button. However, the
same message will re-appear every hour.
Once the projector is turned off, it cannot be turned on again if the accumu-
lated lamp time has exceeded 2000 hours.
EXIT
When the accumulated lamp time reaches 2010 hours, the projector shuts
down and cannot be turned on again.
[ Replace the light-source lamp and reset the lamp time.
(☞ page 47, 48, 49)
Note
• The message display language corresponds to the menu language
setting. This is set to [English] when the projector is bought. The dis-
play language can be selected from among 8 languages. (☞ page 39)
However, the input mode ([PC1], [PC2], [PC3], [Y/C], [VIDEO]) and
button indications ([FREEZE], [D.ZOOM], [EXIT]) are only displayed in
English irrespective of the display language setting.
Cause (Contents)