JVC DLA-RS1X Instructions Manual page 28

4
Setting Menu (Continued)
Setup > Picture Position
M
Picture Position
Adjusts the horizontal/vertical position of the projected image.
The display position value varies with the input signal.
This adjustment is available only for analog input signals.
Setup > HDMI Input Level
N
HDMI Input Level
Configures the input level setting of the HDMI input terminal.
Standard
Enhanced
This setting is available only when projecting the HDMI input.
Setup > Mask
O
Mask
Masks (Hides) the outer area of the projected image.
2.5%
5%
Off
Masking is available only when high definition images are input.
Setup > Overscan
P
Overscan
Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p).
Off
On
Source > COMP
Q
COMP
Configures the input signals of the component video input terminals.
Y Pb/Cb Pr/Cr
RGB
SCART
This setting is available only when projecting the component video input.
Source > HDMI
R
HDMI
Configures the input signals of the HDMI input terminal.
Auto
YCbCr(4:4:4)
YCbCr(4:2:2)
RGB
This setting is available only when projecting the HDMI input.
28
Settings
For normal circumstances, select this setting.
Select this setting when the black-and-white of the projected image is unclear when
RGB video signals are input from DVI devices.
Masks 2.5 % of the screen.
Masks 5 % of the screen.
No masking.
No overscan.
Overscans the top, left, bottom and right at 2.5 % each.
Select this when component video signals are input.
Select this when RGB video signals are input.
Select this when RGB video signals and sync signals are input from SCART plug for
European market.
Automatically configures input signals.
Select this when Y Cb Cr (4:4:4) video signals are input.
Select this when Y Cb Cr (4:2:2) video signals are input.
Select this when RGB video signals are input.