Setting Up Channels (Line Setup) - JVC DLA-M5000LE Instructions Manual

Setting Up Channels (LINE setup)

I Remote control unit
QUICK
ALIGN. OPERATE
AV HIDE
PRESET PAGE BACK
AV RGB/COMPUTER
+
U T
SHIFT ZOOM FOCUS
–
D W
LENS
I CHANNEL setup • selection menu
C H A N N E L
( A U T O )
CH L I N E
1 Y / C
2 V I D E O
3
4
5
6
7
8
9
10
Note
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
PAGE BACK button
MENU/ENTER button
S O U R C E SWNo
1
N T S C ( 4 8 0 i )
P A L / S E C A M 2
When LINE is selected:
The "LINE selection menu" screen appears.
(LINE selection menu)
1 Press MENU/ENTER toward the 5 or ∞
mark to select a line from the "LINE"
items.
• The selected item (text display) is shown in magenta
color.
2
Press the MENU/ENTER button to set.
• When you press MENU/ENTER, the "LINE" item
shown in magenta color is selected, and the display
goes back to the "CHANNEL setup • selection" menu.
• If the "NONE" of "LINE" items is selected and MENU/
ENTER is pressed, all the settings, "LINE", "SOURCE"
and "SW No", of the CH already selected will be
cleared (erased). (If the selected channel is the same
with the one in ( ) under the "CHANNEL" display at the
top of the "CHANNEL setup • selection menu", the
registration or settings cannot be cleared.)
I Pressing PAGE BACK twice will bring you
back to the main menu. To finish the main
menu, press PAGE BACK again.
Operating the Main Menu
L I N E
Y / C
V I D E O
Y P B P R
R G B 1
R G B 2
N O N E
47