Operating Features - Kenwood TK-8102 Service Manual

TK-8102
1. Controls and Functions
1-1. Front Panel
q w e
u y
1-2. Microphone
o
q
(Power) switch
Press to switch the transceiver ON. Press and hold for
approximately 1 seconds to switch the transceiver OFF.
w
key
Press to increase the volume level.
e
key
Press to decrease the volume level.
r
key
PF (Programmable Function) key. The default setting of
this key is None (no function). The programmable func-
tions available for this key are listed below.
t
key
PF (Programmable Function) key. The default setting of
this key is Monitor (page 5). Other programmable func-
tions available for this key are listed below.
y 1/ 2/ 3/ 4 keys
Press to select a channel from 1 to 4.
u Microphone jack
Insert the microphone plug into this jack (the micro-
phone is an optional accessory).
i Speaker
Internal speaker.
o PTT switch
Press this switch, then speak into the microphone to call
a station.
1-3. Auxiliary Programmable Functions:
•
Emergency
•
Key Lock
•
Monitor
•
None (no function)
4

OPERATING FEATURES

r t
•
Scan On/OFF
•
Talk Around
•
Temporary Delete
1-4. Display
i
Indicator
1-5. Rear panel
Antenna connector
Description
Light while transmitting.
Lights when a signal is detected
on the currently selected channel.
Li g hts w hi l e t he f u n ct i o n p r o -
grammed onto its corresponding
key is activated.
Li g hts w hi l e t he f u n ct i o n p r o -
grammed onto its corresponding
key is activated.
Lights to display the currently se-
lected channel (1~ 4)
External
speaker jack
Power input
connector