Table of Contents
Advertisement
INTRODUCTION
Key
TO TV/VCR
1
2
CABLE IN
3
DATA HS
4
AUX AUDIO IN R
AUX AUDIO IN L
IN VIDEO
5
VGA
6
PHONE
7
8
PRINTER
9
CONVENIENCE
OUTLET
DATA IR
10
11
IEEE 1394
Description
This coaxial output connector, when operating on channel 3 or 4, is used to connect the DCT 5000 to a TV or
VCR.
The
connector provides the incoming signal from your service provider.
CABLE IN
For future use.
These connectors are used for connecting the set-top between a CD player and a stereo tuner (or other audio
peripheral). Audio from the auxiliary device will pass through the DCT 5000 when it is turned off.
This connector can accept a baseband video input from a VCR, camcorder, or other video device.
This is an SVGA interface connector for a monitor or other SVGA video display device.
The phone connector enables interface from an in-home phone line to the DCT 5000 modem.
This parallel port is used to interface to a printer or other parallel port device.
This is the AC outlet to connect the power plug from the TV to the DCT 5000.
This connector enables the DCT 5000 to control a VCR while recording a selected program. Not all electronic
program guides support this feature.
This high-speed data interface connector will support PCs, entertainment system devices, data storage, and
future high definition TVs.
5
Advertisement
Table of Contents
