Basic Operation; Turning Power On And Off; Changing Channels; Adjusting The Volume - Seaside DCT 5000 User Manual

BASIC OPERA TION
NOTE
If the / connector on the DCT 5000 is
TO TV VCR
connected to the coaxial
CABLE IN
you must tune your TV to channel 3 or channel 4.

Turning Power On and Off

Press
the remote control.
connector on the TV,

Changing Channels

You can change channels in two ways:
œ
Ã
œ
Ã

Adjusting the Volume

Press
you adjust the volume, the volume scale is displayed on the screen. Press
MUTE
For best audio quality, use the remote control to set the DCT 5000 to
approximately ¾ of maximum volume level and then adjust the audio levels
on the external devices.
on the front panel, or press
POWER
à Ã
Press or on the front panel of the DCT 5000 or press
CHANNEL
à Ã
or on the remote control to step through the channel
CHANNEL
selection.
Enter the number of the channel you want to tune using the numeric
keys on the remote control.
à òÃ
or on the remote control to adjust the volume. When
VOLUME
on the remote control to turn the sound off and on again.
and then press
CABLE
1 3
on
POWER