Advertisement
Dishwasher
Easytronic Dishwashers with Flow Heater - Fully Integrated, Integrated, Built Under, Freestanding
All-Around Water Protection
1.
Aqua-Control Inlet Hose
The inlet hose has a double-wall construction. The inner hose is equipped with a flow
restrictor built into the tap connection, and has a flow rate of 4 litres per minute. The
inlet valve (1) is located in the base of the dishwasher. The safety outer hose (12) is
connected to the regeneration chamber. If the inner hose should burst, the water,
passes into the regeneration chamber and over the safety overflow (5) and into the
base tray activating the float switch which energises the drain pump. This drains the
dishwasher preventing water damage.
2.
Leakage Protection
The anti-flood switch in the base tray will activate the drain pump and drain the water
from the tub in the event of an internal leakage.
If the float switch is activated, all electric components are switched off except the
electronic and the drain pump.
04.99
HV 83-N
292 1372 11
Advertisement
