Sharp CD-C482 Service Manual page 13

( V1 ) x1
ø2.6 x10mm
Shift Lever
CD Player Base
Be careful when installing the CD changer mechanism.
Install the CD changer mechanism on the CD player base after
the shift lever has been set in the highest position.
Figure 13-1
CP-C482
STEP REMOVAL
1 Front Speaker 1. Net .......................... (A1) x1
2. Baffle Board ........... (A2) x1
3. Screw ..................... (A3) x2
4. Screw ..................... (A4) x4
5. Screw ..................... (A5) x2
CP-SW482
STEP REMOVAL
1 Sub woofer 1. Net .......................... (A1) x1
2. Duct Panel ............. (A2) x1
3. Screw ..................... (A3) x4
Note:
The center and rear speakers can be easily disassembled.
Therefore the disassembling method is not discribed.
For details refer to the disassembling drawing in the Parts
Guide.
( U1 ) x4
ø3 x12mm
CD Changer
Mechanism
CD Mechanism
PROCEDURE
FIGURE
13-2
PROCEDURE FIGURE
13-3
CP-C482
Baffle Board
(A2)x1
Net
(A1)x1
Super
Tweeter
ø3x10mm
ø3x10mm
(A4)x4
ø4x16mm
CP-SW482
Net
( A1 ) x1
( A3 ) x4
ø4 x16mm
( A2 ) x1
– 13 –
CD-C482
Tweeter
Woofer
Screw driver
(A5)x2
Tweeter
(A3)x2
Woofer
Figure 13-2
Woofer
Screwdriver
Figure 13-3