Advertisement
Fig. 3 ASSEMBLY
!3 Washers (for M10)
t 2 screws [A]
(M4
u Inner pole
!8 4 hexagon socket
bolts (M5
16)
i Inner pole
fixing plate
@0 4 nuts (for M5)
!9 4 washers
(for M5)
o 4 hexagon socket
bolts (M5
10)
(*) Fastening bolts for
body's plate (4 bolts)
Air inlet ( )
LCD projector
!4 2 screws [B] (M8
w Supporter for LCD projector
Unit of indicated dimensions (mm)
WARNING
(*) Parts
: The asterisked parts such as the holder plates (2 plates), fastening bolts for holder plates (8 bolts), and fastening bolts for body's
plate (4 bolts) are built in to constitute component parts of the body's plate.
: Never remove the above-mentioned component parts under any circumstances since they are absolutely required to ensure safety.
Fig. 4 FRONT VIEW
Exhaust hole ( )
Unit of indicated dimension (mm)
y Ceiling plate
!2 Nut
12)
q Coupling
plate
14)
24
!7 2 rotary mini
setscrews (M5
5)
!1 Hexagon head bolts
[C] (M10
65)
!3 Washer (for M10)
!0 Collar
r 2 rotary setscrews [E] (M5
e 4 assembling bolts (M8
Body's plate
(*) Holder plates (2 plates)
(*) Fastening bolts for
holder plate (8 bolts)
Note:
Air inlet:
This is an inlet to bring cool air into the LCD
projector. Do not cover it with a lid, etc.
Note:
Exhaust hole:
This is a hole to exhaust hot air inside the LCD projector. When
installing the unit near a wall, etc., keep it away more than 50 cm
or so from the face of the exhaust hole.
– 3 –
Fig. 3-1
20
(109.6)
150
Size of fixing hole of base metal fixtures
10)
25)
!5 Hexagon wrench
(accessory)
Hexagon socket bolts
for M5
10
Advertisement
