Performance Of Your Amplifier: Specifications - MC2 Audio E100 Operating Instructions Manual

E Series – E100 Operating Instructions

Performance Of Your Amplifier: Specifications

Main Specifications
Parameter (Units)
Output Power per channel [Crest Factor = 4.8] (Watts)
Output Power per channel bridged [Crest Factor = 4.8] (Watts)
THD+N, 4 Ohms (%)
@20Hz - 20kHz, 1dB below max output power
Gain Options (dB)
Sensitivity Options for max power (dBu)
Sensitivity Options for max power (Volts)
Frequency Response, +0/0.5dB (Hz)
Power Consumption, Nominal @ 240V, 4 Ohms (A)
Power Consumption, Nominal @ 120V, 4 Ohms (A)
Dimensions H x W x D (mm)
Weight (kgs)
Additional Specifications
Parameter (Units)
Input Impedance — Active Balanced (Ohms)
Input CMRR (dB)
SNR (dB)
Damping Factor, 1kHz, 8 ohms
Signal Limiters Present
Protection Present — Short Circuit / DC Output / Temperature
Mains In-rush Control Present
Output Power per channel, 8 Ohms (Watts)
Continuous music [Crest Factor of 2.8 or 9dB]
Continuous music [Crest Factor of 4.8 or 14dB]
Continuous music [Crest Factor of 7.8 or 18dB]
Output Power per channel, 4 Ohms (Watts)
Continuous music [Crest Factor of 2.8 or 9dB]
Continuous music [Crest Factor of 4.8 or 14dB]
Continuous music [Crest Factor of 7.8 or 18dB]
Output Power per channel, 2 Ohms (Watts)
Continuous music with Crest Factor of 2.8 [9dB]
Continuous music with Crest Factor of 4.8 [14dB]
Continuous music with Crest Factor of 7.8 [18dB]
Due to continuing product improvement the above specifications are subject to change.
@1kHz, 1dB below max output power
Boxed Shipping — all except UK
Boxed — shipping
Sine Wave @ 1kHz
Sine Wave @ 1kHz
Sine Wave @ 1kHz
E100
8 Ohms 1400
4 Ohms 2800
2 Ohms 3700
8 Ohms 5300
4 Ohms 7400
0.08
<
0.15
<
26 / 32 / 36
16.0 / 10.0 / 6.0
4.9 / 2.5 / 1.5
20 — 20000
7.0
14.0
Amplifier 88 x 482 x 428
Boxed 230 x 580 x 560
250 x 610 x 600
Amplifier 12.0
14.0
E100
20k
60
>
105
400
>
Yes
Yes
Yes
1150
1300
1400
1480
2250
2600
2800
2900
3200
3600
3700
3700
Page 19