Table of Contents
Advertisement
NUMBER
BUTTONS
- 10 KEY PAD
Use the number
buttons on the remote control to move directly to a specific channel.
For
example,
to move to channel 7:
_
0 (Zero)
7 (Seven)
100+ BUTTON
Use the 100+ button to directly
access channels
above Channel 99. For example,
to move to
channel
124:
100+
(_
2 (TWO)
4 (Four)
RETURN+
The RETURN+ button has two functions:
Return
- Returns to the channel
viewed just before the channel
currently onscreen.
Return+
- Lets you program
a specific channel to return to while scanning
through
the
channels.
To program:
RETURN+ and hold for three seconds.
You can now scan through the channels
using the CH+i- buttons.
RETURN+
You will return to your programmed
channel
• To cancel your RETURN+ channel,
press and hold the RETURN+ button for three seconds.
The
message
"RETURN
CHANNEL
CANCELLED!"
will appear.
•
RETURN+ works only with CHANNEL+i-. Pressing any number
key will cancel
RETURN+.
VoCHIP
By pressing
the remote control V-CH_Pbutton, the V-chip rating information
for the program
which is being received
is displayed
on the screen.
if the V-chip rating information
is not being sent, "UNRATED"
is displayed
on the screen.
if the zero ("0") button is pressed while the V-chip rating is displayed
on the screen,
all
categories
with the same or a higher V-chip rating will be blocked.
For example,
if you block movies rated NC-17, movies
rated X will atso be blocked.
• V-chip blocks can be manually
set one at a time by using the V-chip option in the iNiTiAL
SETUP menu. For detailed information
about V-chip ratings and V-chip manual settings,
refer
to pages 33 to 38.
57
Advertisement
Table of Contents
