Table of Contents
Advertisement
Co
Connecting
to Cable or an Antenna
There
are three
basic
types
of antenna
or cable
connections:
If you have an antenna
or have a cable system that does not require you use a cable
box to select channels,
please
refer to Diagram
#1.
•
If you have a cable system
that requires the use of a cable box to access all the
channels,
please refer to Diagram
#2.
If you have a cable system that requires the use of a cable box [o access certain
premium
channels,
but not "basic" cable channels,
please
refer to Diagram
#3,
,
For your convenience
connection
to a VCR is also shown Jn the following
diagrams.
A
VCR is no1 necessary
for operation
of the television
or Picture
OUT or Picture
POP
function.
You may omit the VCR from your connections
if you wish.
For instructions
on connecting
a VCR only, please see the Quick Setup on page 10.
,
For information
on using POP, please see page 54
Diagram
#1
Cable or Antenna
Output
TV Rear Panel
(RF input)
j
Cabte/RF connector
1) Connect an RF Cable from the wail outtet into the RF Cable In on the back of the TV.
Connecting
to a Cable Box
Diagram
#2
CaMe
or Antenna
Output
B
TV Rear Panel
(RF input)
1) Connect
an RF Cable from the wait outlet into the RF Cable In on the Cable Box.
2) Connect
an RF cable from the Cable Out on the cable box into the RF Cable In on the back
of the TV.
NOTE:
Please see page 54 for more information on using the POP feature with a cable box,
1
Advertisement
Table of Contents
