Table of Contents
Advertisement
Step Two o Making
Basic
Connections
Next you will need to connect
your television
to an antenna,
VCR or cable system.
The most
basic VCR and antenna!cable
connection
is shown below.
For more detaiIed
connections,
such as ones where a cable box is required,
or connecting
with a combination
of a cable box
and VCR, home stereo system,
etc., see pages 12 to 20.
Cable or Antenna
Output
_q
TV Rear Panel
__j_
(RF Input)
Cable/RF
connector
1) Connect
an RF Cable from the wail outlet into the RF Cable In on the back of the TV.
Connecting
to a VCR
WALL
VCR
CABLE
or
ANTENNA
OUT
BACK of TV
1) Connect the Red Cable from VCR Audio Output into the Red TV Audio In.
2) Connect the White Cable from VCR Audio Output into the White TV Audio
In.
3) Connect the Yeltow Cable from VCR Output into the YeItow TV Video In, OR Connect
an
RF Cable from VCR RF Cable Out into the RF Cable In on the back of the TV.
NOTE:
• White, Yellow and Red are the most common colors for VCR Cables. Some models may
vary in color. Please consult the user's manual for your VCR Player for more information.
• See page 23 for instructions on programming your remote control to operate the basic
functions of your VCR Player.
1
Proceed to Step Three
Advertisement
Table of Contents
