Button Functions
Power
Turns the TV on or off.
Press the P
Note:
• After turning the power on, you can not turn the power off for about one minute.
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
1 (One)
2 (Two)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
1 (One)
2 (Two)
Press the T
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
To move rapidly through the channels using JVC's Hyperscan feature, press and hold CH+ or
CH –.
Volume +/–
Use these buttons to raise or lower the TV's volume level. The maximum is the level you set in
Volume Limit. See page 56.
Muting
The M
button instantly turns the volume down completely when you press it. Press
UTING
M
and the volume level will instantly go to zero. To restore the volume to its previous
UTING
level, press M
UTING
60
button
OWER
button. For example, to move to channel 12:
UNE
button
UNE
again.