Electrical Specifications - Sharp 13VT-R100 Service Manual

13VT-R100/R150
13VT-CR10
TV SECTION
INTERMEDIATE FREQUENCIES
Picture IF Carrier Frequency:
Sound IF Carrier Frequency:
Color Sub-Carrier Frequency:
AUDIO POWER OUTPUT RATING:
VHF/UHF ANTENNA INPUT IMPEDANCE:
VCR SECTION
Maximum Recording Time:

ELECTRICAL SPECIFICATIONS

POWER INPUT:
POWER RATING:
PICTURE SIZE
Width:
Height:
Depth:
CONVERGENCE:
SWEEP DEFLECTION:
FOCUS:
SPEAKER
Size:
Voice Coil Impedance:
TUNING RANGES
VHF-Channels:
UHF -Channels:
CATV Channels:
Format:
Video Recording System:
Number of Video Heads:
Video Signal Standard:
Tape Width:
Tape Speed:
Video Input:
Audio Input:
Operating Temperature:
Storage Temperature:
Specifications are subject to change without prior notice.
120 V AC 60 Hz
65 W
37.8 cm
38.7 cm
37.5 cm
Magnetic
Magnetic
Hi-Bi-Potential Electrostatic
45.75 MHz
41.25 MHz
42.17 MHz (Nominal)
0.8 W (at 10% Distortion)
5 × 9 cm (2" × 3
1
/ ")
2
16 ohm at 400 Hz
75 ohm unbalanced
2 thru 13
14 thru 69
1,14 thru 125 (EIA, Channel Plan)
VHS Standard
Rotary Two-Head Helical Scanning
2 pcs.
NTSC Color System
12.7mm (1/2inch)
(SP)33.35mm/sec (1.31 i.p.s)
(LP)16.68mm/sec (0.66 i.p.s)
Play back only
(EP)11.12 mm/sec (0.44 i.p.s)
(SP)120 min (with T-120)
(EP)360 min (with T-120)
0.5 to 2.0 Vp-p, 75 ohm unbalanced
-8 dB, 47k ohm unbalanced (0 dB-0.775 Vrms)
5°C to 40°C (41°F to 104°F)
-20°C to 60°C (-4°F to 140°F)
6