Fitting A Radio - Renault 2009 CLIO Handbook

FITTING A RADIO

1
Radio location 1
Unclip the blanking cover. The aerial, +
and – supply and speaker wire connec-
tions are located behind it.
– In all cases, it is very important to follow the manufacturer's instructions carefully.
– The specifications of the brackets and wires (available from our network) vary depending on the equipment level of your
vehicle and the type of radio.
Consult an approved Dealer to find out the correct part number.
– No work may be carried out on the vehicle's electrical or radio circuits, except by approved dealers: an incorrectly connected
system may result in damage being caused to the electrical equipment and/or the components connected to it.
2
Tweeter speakers
Using a flat-blade screwdriver or simi-
lar, unclip grille 2 to access the speaker
wires.
3
Door speakers
Using a flat-blade screwdriver or simi-
lar, unclip grille 3 to access the speaker
wires.
5.33