Table of Contents
Advertisement
CRUISE CONTROL/SPEED LIMITER: cruise control function
2
3
4
Putting the function on
standby
The function is interrupted when you:
– the switch 4 (O);
– the brake pedal;
– the clutch pedal or shift into neutral
if the vehicle has an automatic gear-
box.
In all three cases, the cruising speed is
stored.
Standby is confirmed when indicator
¦
light
goes out.
2.30
Recalling the cruising speed
If a speed has been stored, it is possi-
ble to recall it by pressing switch 5 (R),
on condition that you are driving faster
than 20 mph (30 km/h) and that you
are sure that the driving conditions are
5
suitable (traffic, road surface condition,
weather conditions, etc.).
Pressing switches 2 (+) or 3 (-) re-
activates the cruise control func-
tion without taking into account the
memorised speed: it is the speed at
which the vehicle is moving that is
taken into account.
(4/4)
1
Switching off the function
Press switch 1. If you do this, the speed
is not memorised.
The instrument panel green indicator
Ï
¦
lights
and
firming that the function is deactivated.
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you
must brake by depressing the brake
pedal.
go out, con-
Advertisement
Chapters
Table of Contents
