Installing The Software - JVC GV-PT2U Instructions Manual

56
INSTALLING IN A WINDOWS-COMPATIBLE PC
Refer to the Windows user manual for details on basic Windows operation.
INSTALLATION
1 .
Start Windows .
•Close any other programs that are open.
2 .
Insert the "Driver & Capture Utility Software (INSTALL DISK)" into the floppy disk drive.
3 .
•With Windows 95, select [START]-Run command.
•With Windows 3.1, [ICON]-Run on the program manager.
4 .
Once the Driver & Capture Utility Software has been loaded into drive A, type a:\setup in
the [COMMAND LINE] textbox. (Type b:\setup if the disk is in drive B.)
•Click the <OK> button.
•Once the setup program launches, follow the instructions that appear on screen.
•If you agree with the Software License Agreement, type [Yes]. If not, type [No] to quit the
program.
•When the setup is complete, the "JVC GV-PT2 Capture" icon appears on the screen.
•[Normal installation completed] message is displayed.
5.
Click the <Reboot> button.
Windows closes and then opens again. This completes installation.
Setting up ...

INSTALLING THE SOFTWARE