JVC GV-PT2U Instructions Manual page 31

Output tray
Print lamp
FRAME STABILIZER
Switching between ON/OFF of FRAME STABILIZER is not available in the Strobe Print mode.
BEGIN SOURCE PLAYBACK
4
Fast-forward or rewind the source tape to find
the desired scene, then start playback a little
before the scene.
PRESS MEMORY WHEN THE DE-
5
SIRED IMAGE APPEARS
•The images are automatically stored at
intervals of approx. 1/15 sec. in
STROBE<HIGH> and 1/2 sec. in
STROBE<LOW>.
•When the maximum number of images is
stored, the screen switches from INPUT to
MEMORY display.
•In order to superimpose titles, see pages 40
through 43. Title imposing is done across the
entire screen, not on each image separately.
•Masking facility is not available.
PRESS PRINT
6
•Print Lamp blinks, indicating that printing
has started.
•"Now printing!!" appears on screen during
printing.
•When the printed sheets are delivered to the
output tray and "Now printing!!" disappears,
printing is complete. Do not leave more
than 25 printed sheets stacked on the tray.
31