Rear View - JVC GV-PT2U Instructions Manual

Rear View

&
PARALLEL Connector
• Connect to the parallel (printer) terminal
of a computer using a commercially
available printer cable.
*
Service Door for Jammed Paper Removal
• Open this door when paper is jammed.
* Do not open this door unless paper is
jammed. Be sure to close this after
clearing the paper jam.
(
JLIP (Joint Level Interface Protocol)
Connector
• For connection to a computer for
manipulation of printer images. Refer to
the HELP or README files provided with
the HS-V1U (Ver 1.10) software for
details.
& *
( )
)
Video Output Connector
• Use this connector when you want to
view the input image, or an image stored
in memory, on a television. Using a
commercially available video cable,
connect the printer to a television.
q
Power Cord
• Plug into an AC outlet (AC 120 V).
Notice to JLIP PLAYER PACK HS-V1U
(Ver. 1.08) users
HS-V1U (Ver. 1.08) is not compatible with
the GV-PT2U. (If the version number is
not printed on the HS-V1U's diskette, that
means that the version is 1.08.)
A version of HS-V1U compatible with the
GV-PT2U will be made available from our
home page (in English):
<www> http://www.jvc-victor.co.jp/
For further details, consult your nearest
JVC dealer.
q
11