Table of Contents
Advertisement
HOW TO INSTALL THE SOFTWARE
IN STALLIN G IN A W IN DO W S CO M PATIBLE PC
See the instruction manual of Windows or the PC in use for the basic operation of Windows .
In the ca se of W indow s 9 5
1
Start up W indows 95.
• If you have any other applications
open, close them all.
2
Insert the "D river & Capture U tility
Software" into the floppy disk drive.
3
D ouble-click the M y Computer icon on
the desktop.
4
D ouble-click the floppy disk icon.
• The SETUP icon appears on the display.
5
D ouble-click the SETU P icon.
• Installation begins.
• Follow the instruction messages on the
display.
• If you agree to the Software Licensing
Agreement, press [Yes]. If not, press
[No], and the processing is closed.
6
Click the [Reboot] button.
• Windows is once closed and then
opened again.
• This completes the installation
procedure.
The provided software is capable of displaying 6 languages including English, German,
French, Spanish, Italian and Dutch.
The language used by the software is selected automatically at the time of installation
according to the language setup of your personal computer.
English is used when your personal computer is set to a language other than one listed
above.
Downloaded from:
https://www.usersmanualguide.com/
In the ca se of W indow s 3 .1
1
Start up W indows 3.1.
• If you have any other applications
open, close them all.
2
Insert the "D river & Capture U tility
Software" into the floppy disk drive.
3
Select [File M anager] from the [M ain]
group on the W indows display.
4
Select a floppy disk drive.
• The setup. exe file appears on the display.
5
D ouble-click the setup. exe file.
• Installation begins.
• Follow the instruction messages on the
display.
• If you agree to the Software Licensing
Agreement, press [Yes]. If not, press
[No], and the processing is closed.
6
Click the [Reboot] button.
• Windows is once closed and then
opened again.
• This completes the installation
procedure.
25
EN
Advertisement
Table of Contents
