Fusing Lamps - Ricoh D010 Service Manual

Fusing

3.10.3 FUSING LAMPS

1. Fusing unit
2. Separate the hot roller section [A] from the pressure roller section [B] (
3. Front holding plate [C] (
4. Rear holding plate [D] (
5. Fusing lamp with the connector (600W) [E] (
6. Fusing lamp with the connector (550W) [F] (
Check that the front ends of both lamps fit in the front holding plate when you
reassemble. They will not fit if you arrange the two lamps incorrectly.
D010
x 1)
x 1)
3-50
x 2)
x 2)
x 4).
SM