JVC 0199MNV*UN*SW Instructions Manual page 32

32
FRAME IMPOSE
Seven different frames are stored in the printer and can
be called up for superimposed printing.
Preparation
See page 12.
Press INPUT SELECT to select the appropriate input mode
depending on the connection to the source unit (
•If IrDA (INFRARED) or PC MODE is selected, you do not have to perform steps 1 and 2 . Refer to page
20 or 38 to send the image you want to print to the printer.
BEGIN SOURCE PLAYBACK
1
1
PRESS MEMORY WHEN THE
2
DESIRED IMAGE APPEARS
•If the image is unstable, press
MEMORY again.
2 PRESS OK
PRESS MENU
3
PRESS CURSOR
4
FRAME,
THEN
PRESS OK
If you want to print a different image...
Follow the instructions below to erase the frame before printing.
1 Perform steps 3 – 6 described above, selecting the blank frame in the upper left corner
of the screen in step 5 .
2
Press SOURCE/STORED IMAGE to switch back to the input display.
The frame is now erased.
DIFFERENT TYPES OF PRINTING (cont.)
TO SELECT
MENU 2
EFFECT
TITLE
FRAME
QUALITY :
STD HIGH
PICTURE MEMORY
TO MENU 1 [ ]
ITEM [ / ]
OK [OK]
SELECT [ / ] QUIT [MENU]
page 18).
PRESS CURSOR
5
THE
DESIRED
FRAME
PRESS OK
6
•The image appears on screen with the
selected frame superimposed on it.
2/2
•If you want to cancel and try again,
press MENU.
PRESS OK
7
•If you also want to superimpose one of
the stored titles on the image, perform
steps 3 – 7 on page 31.
PRESS PRINT TO START
8
PRINTING
TO SELECT
SEL [ / ]
OK [OK]
QUIT
[MENU]