JVC 0199MNV*UN*SW Instructions Manual page 11

%
^
&
^
MENU button
• Press to access the MENU screen.
&
Cursor buttons
• Use to make selections during menu
operation.
*
INPUT SELECT button
• Press to select the video data input mode.
(
SOURCE/STORED IMAGE button
• Press to switch between input and stored
display.
)
MEMORY/FRAME STABILIZER button
• Press to store an image for printing.
• Press to stabilize the frame of an unstable
image.
q
PRINT button
Press to print an image.
w
PRINT lamp
• Lights when video data are being stored
in the printer and blinks while the printer
is printing an image or receiving video
data.
e
Vent holes
• Provided for ventilation to protect the
unit from overheating; do NOT block or
cover them.
POWER
7
EXACT PICTURE
FRAME PROCESSOR
8
9 0
MENU OK
! @
DV IrDA (IrTran-P) VIDEO
INPUT SOURCE/
MEMORY
SELECT STORED IMAGE
FRAME STABILIZER
* ( )
r
Service Door for Jammed Paper Removal
• Open this door when paper is jammed.
* Do not open this door unless paper is
jammed. Be sure to close this after
clearing the paper jam.
t
PC Connector
• Connect to a computer using the pro-
vided PC connection cable.
y
Video Output Connector
• Using a video cable, connect the printer
to a television.
u
Power Cord
• Plug into an AC outlet. Be sure to press
the POWER button to turn off the power
before unplugging the power cord.
# $
PC EXACT FRAME
PRINT
q w
11