Loading The Paper Tray - JVC 0199MNV*UN*SW Instructions Manual

LOADING THE PAPER TRAY

A
To printer
Printing side
Detection marks
Partition panel
Opening the paper tray
Open the lid while pushing
Inserting color print paper sheets in
the paper tray
With Standard/Sticker Print Paper
1. Keep the partition panel upright. If it is
down or tilted, push it back to the upright
position.
2. Load print sheets in the tray, placing the
sides with the detection marks or printing
toward the printer face down.
•The tray can hold up to 25 sheets at one
time.
With Super-Fine High Grade Paper
1. Push down the partition panel.
2. Load print sheets in the tray in the same
way as Standard/Sticker Print Paper.
•The tray can hold up to 25 sheets at one
time.
Shuffle print paper sheets thoroughly to
separate each sheet before placing them in
the paper tray.
Be sure to read the precautions on the paper
tray lid.
Loading/unloading the paper tray
When loading, push the tray until it clicks.
When unloading, push the tray slightly to
unlock the latch, then pull it out.
15
.
A