Table of Contents
Advertisement
TT420
8
Loading printer pre-sets
During the printer installation procedure additional files are copied that will automatically
change the printer settings of the TT420 to suit the required HellermannTyton materials. This
automated feature will enable you to work in an easier way.
⇒ Please note that the pre-set data are stored in the folder C:\TT420Init\
If alternative label material and ribbon combinations are used, we recommend to use the
manual setting and calibration of the sensors as described in page 40.
If only one material type (e.g. Helatag plain labels) is used on the printer, the
recommendation is to load the pre-sets directly in the system preferences of the Windows
operating system. This makes the reloading of the pre-sets obsolete when restarting the
system.
Frequent changes of material types (i.e. plain labels, ShrinkTrak, laminating labels, ...) result
in setting the pre-sets from the application (i.e TagPrint PRO). Please note that the pre-sets
need to be reloaded every time the application program is restarted.
1.
Choose the printer overview with Start -> Settings -> Printers and Faxes
Operating instructions
29
Advertisement
Table of Contents
