Table of Contents
Advertisement
TT420
7
Driver installation
The driver interprets the data of the label printing software (e.g. TagPrint PRO) and forwards
them in a language that the printer understands. Only careful installation of the driver
guarantees the trouble free operation of the printer.
Depending on your operating system and the chosen interface to the PC (USB, parallel or
serial) the installation procedure can be different.
To install the printer driver the necessary rights to install hardware are necessary.
⇒ Inform your system administrator
The standard settings of Windows 95 and Windows NT4.0 do not support the USB interface.
⇒ Use different interface
⇒ Inform the system administrator
7.1
Operating system Windows XP and USB interface
Install the printer only via the automatic USB interface detection as described in this manual.
If the printer is installed without automatic detection the printer might not be detected
afterwards.
1.
Ensure the printer is switched off.
2.
Connect the printer via the USB cable.
3.
Switch on the printer
4.
Windows XP will detect new hardware via the linked USB port and automatically starts
the hardware assistant.
Operating instructions
22
Advertisement
Table of Contents
