Prints Of Terminal Block Tags In "Single" Feeder Mode; Accessories; Preparing Of The Support Plate - ABB HTP500 User Manual

5 - PRINTS OF TERMINAL BLOCK TAGS in "SINGLE" Feeder Mode

This section explains how to print with the HTP500 V2 easily and quickly.
Execute all the described operations with the printer turned off.
All needs to be done is to position correctly the Support Plate for the Semi-Automatic
Terminal Block on the printer guides following carefully the instructions here follow.

5.1 Accessories

5.2 Preparing of the Support Plate

5.3 Turning on the Printer
5.4 Print on Terminal Block tags TB Series
5.1 ACCESSORIES
HTP500 V2 is supplied with the following accessories:
Item: HTP500-PL3 – Support Plate for Semi-Automatic T-Blocks tags (others manufacturers
than ABB)
5.2 PREPARING OF THE SUPPORT PLATE
To print the T-Blocks tags it is necessary to position them on the SUPPORT PLATE as
shown in the picture here follow.
This is a Module of T-Blocks tags, ABB item code MC512.
Take the Module of the Terminal Blocks Tags and position it on the Support Plate for
Terminal Blocks in the way that the module's feet can fit in the Support Plate for Terminal
Blocks holes as in the picture.
Be sure that the Module is well positioned on the Support Plate for Terminal Blocks.