Centering - ABB HTP500 User Manual

F) Table of Printer Devices and Pre-set Profiles
Pre-set profiles that contains the Printer Device Parameters.
PRINTER DEVICE NAME created in
WINDOWS
HTP500 V2 TERMINAL BLOCKS
HTP500 V2 CABLES
HTP500 V2 HORIZ METHACRYLATE
HTP500 V2 HORIZ PVC LABELS
HTP500 V2 VERTICAL PVC LABELS
HTP500 V2 OTHER TERMINAL BLOCKS

3.5 CENTERING

The centering allows you to makes some corrections at the print start point. The coordinates
(x,y) can be modified for to move the starting point on the right, left, to the top, or at the
bottom.
a.1) Run the HTS500Hip
a.2) Select 'File', Select 'Plotter Setup'
a.3) Select the centering button (the second of the three buttons for each device)
a.4) Check the box 'Thermal Transfer Printer'.
It is possible to make corrections on the starting position inserting a relative value express
with a hundredth of millimetre precision.
To move the print starting:
At the top
At the bottom
On right
On left
To verify the print starting position it is possible utilize any available item and compatible with
the selected device.
PRE-SET PROFILE that must be associated to
the PRINTER DEVICE NAME
SINGLE TB T-BLOCKS
AUTOM CABLES
MMA HORIZONTAL Plates
PVC HORIZONTAL
PVC VERTICAL
AUTOM AF T-BLOCKS
Type in a positive value for the Y axis
Type in a negative value for the Y axis
Type in a positive value for the X axis
Type in a negative value for the X axis