Please Wait - ABB HTP500 User Manual

LEDS

POWER: Lights when you turn on the power switch
ONLINE: Lights when the printer is ready to receive data and flashes when the printer is
receiving data. Turns off when the printer is offline
MESSAGE: Flashes when an error has occurred and the printer is not able to print
KEYS

[ONLINE]: Press this key to switch the printer online
[MENU/ ]: Press this key to enter the printer Menu selection mode when the printer is
offline
Once entered the Menu mode, use this key to select the Menu function desired
If the Menu function has been selected, holding down this key will cause the
conveyor roller to rotate to the left ejecting the item inserted into the printer
[ ]: Once entered the Menu mode, use this key to display each Menu function
If the Menu function has been selected, holding down this key will cause the
conveyor roller to rotate to the right ejecting the item inserted into the printer
[ENTER]: Press this key to confirm and execute the Menu function selected
[CANCEL]: Press this key to cancel the Menu function selected
Press this key to eject an item inserted into the printer
Hold down this key at least 3 seconds straight, to cancel the data received from
In order to perform a Menu function, always put the printer offline pressing the ONLINE key
so that the ONLINE led turns off.
LCD display
HTP500 V2 display shows the printer functions and statuses.
2.1.1 Control Panel Menu mode
Turn on the HTP500 V2
The two following messagges will appear on the display

PLEASE WAIT...

VERSION X.X
Press the ONLINE button to put the printer OFFLINE (the ONLINE led turns off).
At this stage each one of the following Menu functions can be selected:
CLEANING
TEST PRINT select this item to set the time until the power automatically switches off
PRINT MODE
AUTO CLEANING to set the timer for the automatic cleaning of the cleaning roller
the printer
to clean the cleaning roller
to set the print speed and Quality Mode
REMIND
PRINT READY
PLATE SBLACK