Honda 2013 NSS300 Owner's Manual page 97

Electrical Trouble
❙
Main fuse 2
Starter
magnetic
switch
1. Remove the battery cover.
2. Disconnect the wire connector of the
starter magnetic switch.
3. Pull the main fuse 2 out with the fuse
puller in the tool kit and check for a blown
fuse. Always replace a blown fuse with a
spare of the same rating.
94
Blown Fuse
u
Wire connector
Main fuse 2
Spare fuse
P. 60
2
4. Install the parts in the reverse order of
removal.
5. Close the seat.
NOTICE
If a fuse fails repeatedly, you likely have an electrical
problem. Have your scooter inspected by your dealer.