Installing Sfp And Sfp+ Ports - D-Link DGS-3000 Series Hardware Installation Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide

Installing SFP and SFP+ Ports

The Switch is equipped with SFP (Small Form Factor Portable) and SFP+ ports, which are used with fiber-optical
transceiver cabling.SFP ports support full-duplex transmissions, auto-negotiation, and can be uplinked with various
other switches across a gigabit network. The SFP ports support data rates of up to 1Gbit/s and the SFP+ ports
support data rates of up to 10Gbit/s.
See the figure below for installing the SFP ports in the Switch.
Figure 2-11 Inserting fiber-optic transceivers into the Switch
For a full list of supported transceivers, compatible with this switch series, refer to Port Functions.
16