Sony TRINITRON KV-13FS100 Service Manual page 71

Operating Instructions
TV and Cable Box
From
cable
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on the TV.


To view channels from your cable box, tune your TV to channel 3 or 4 (as set on the rear
panel of your cable box) and use the cable box's remote control to change channels.


If you will be controlling all channel selection through your cable box, you should consider
using the Channel Fix feature by setting your TV to channnel 3 or 4 (see page 20).
6
1
Coaxial
2
Cable
Cable Box
Rear of TV