Sony KV-13FM13 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. TV
  5. FD TRINITRON WEGA KV-13FM13
  6. Service manual

Sony KV-13FM13 Service Manual

Trinitron series color television
Hide thumbs Also See for KV-13FM13:
Table of Contents

Advertisement

Quick Links

See also: Training Manual

SERVICE MANUAL

MODEL NAME
KV-13FM13
KV-13FM14
9-965-909-01
REMOTE COMMANDER
DESTINATION
RM-Y172
Canada
RM-Y172
Canada
KV-13FM13
TRINITRON
BA-5
CHASSIS
CHASSIS NO.
SCC-S41N-A
SCC-S41P-A
RM-Y172
COLOR TELEVISION
®

Advertisement

Table of Contents
loading

Related Manuals for Sony KV-13FM13

Summary of Contents for Sony KV-13FM13

  • Page 1: Service Manual

    BA-5 SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-13FM13 RM-Y172 Canada SCC-S41N-A KV-13FM14 RM-Y172 Canada SCC-S41P-A KV-13FM13 RM-Y172 TRINITRON COLOR TELEVISION ® 9-965-909-01...

  • Page 2: Table Of Contents

    KV-13FM13 / 13FM14 TABLE OF CONTENTS SECTION TITLE PAGE SpeciÞ cations............................3 Warnings and Cautions........................4 Safety Check-out ..........................5 Self-Diagnostic Function........................6 1. Disassembly 1-1. Rear Cover Removal ........................9 1-2. Chassis Assembly Removal ......................9 1-3. Service Position..........................9 1-4.

  • Page 3: Speciþ Cations

    KV-13FM13 / 13FM14 SPECIFICATIONS Power Requirements 120V, 60Hz Number of Inputs/Outputs Video Audio Headphone Out Speaker Output (1 Vp-p 75 ohms unbalanced, sync negative) (500 Vrms (100% modulation), Impedance: 47 kilohms) Power Consumption In Use (Max) In Standby Dimensions (W x H x D)

  • Page 4: Warnings And Cautions

    Ne les remplacer que par des composants sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identiÞ...

  • Page 5: Safety Check-Out

    KV-13FM13 / 13FM14 SAFETY CHECK-OUT Leakage Test After correcting the original service problem, perform the following safety checks before releasing the set to the customer: The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to 1.

  • Page 6: Self-Diagnostic Function

    KV-13FM13 / 13FM14 SELF-DIAGNOSTIC FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to ß ash. The number of times the LED ß ashes translates to a probable source of the problem. A deÞ nition of the STANDBY/TIMER LED ß ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 7 KV-13FM13 / 13FM14 Stopping the Standby/Timer LED Flash Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER LAMP from ß ashing. Self-Diagnostic Screen Display For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be conÞ rmed, it is possible to bring up past occurrences of failure on the screen for conÞ...
  • Page 8 KV-13FM13 / 13FM14 Self-Diagnostic Circuit MB BOARD A BOARD MB BOARD MB BOARD IC1301 IC502 IC1001 IC1003 Y/CHROMA JUNGLE V. OUT SYSTEM MEMORY FROM IK IN IO-BDAT B-DAT CB BOARD I-PROT CN705 PIN1 A BOARD HP/PROTECT FROM IC501 O-LED PIN 3...

  • Page 9: Disassembly

    KV-13FM13 / 13FM14 SECTION 1: DISASSEMBLY 1-1. REAR COVER REMOVAL Screw +BVTP 4x16 Screw +BVTP 4x16 Rear Cover Screw +BVTP 4x16 Screw +BVTP 4x16 1-2. CHASSIS ASSEMBLY REMOVAL 1-3. SERVICE POSITION Board Board CB Board Board MB Board Claw MB Board...

  • Page 10: Picture Tube Removal

    KV-13FM13 / 13FM14 1-4. PICTURE TUBE REMOVAL WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT coated earth ground strap.

  • Page 11: Set-Up Adjustments

    KV-13FM13 / 13FM14 SECTION 2: SET-UP ADJUSTMENTS Perform the adjustments in order as follows: The following adjustments should be made when a complete Beam Landing realignment is required or a new picture tube is installed. Convergence These adjustments should be performed with rated power supply Focus voltage unless otherwise noted.

  • Page 12: Convergence

    KV-13FM13 / 13FM14 2-2. CONVERGENCE HORIZONTAL STATIC CONVERGENCE Preparation: If the blue dot does not converge with the red and green dots, perform the following: • Perform FOCUS, V. LIN and V. SIZE adjustments. • Set BRIGHTNESS control to minimum.

  • Page 13: Focus

    KV-13FM13 / 13FM14 DYNAMIC CONVERGENCE ADJUSTMENT 5. Adjust YCH VR to balance Y axis. 6. Adjust vertical red and blue convergence with V.TILT (TLV VR). Before starting, perform Vertical and Horizontal Static Convergence Perform adjustments while tracking items 1 and 2.

  • Page 14: Screen (G2)

    KV-13FM13 / 13FM14 2-4. SCREEN (G2) 2-6. WHITE BALANCE ADJUSTMENTS 1. Input a dot pattern. 1. Input an entire white signal with burst. 2. Set the PICTURE and BRIGHTNESS controls at minimum and 2. Set to Service Adjustment Mode. COLOR control at normal.

  • Page 15: Safety Related Adjustments

    KV-13FM13 / 13FM14 SECTION 3: SAFETY RELATED ADJUSTMENTS 3-1. X R564 CONFIRMATION METHOD (HV HOLD-DOWN CONFIRMATION AND READJUSTMENTS) The following adjustments should always be performed when Hold-Down Readjustment replacing the following components which are marked with Y on If the setting indicated in step 2 of Hold-Down Operation ConÞ rmation...
  • Page 16 KV-13FM13 / 13FM14 POWER SUPPLY DIGITAL MULTIMETER – 1SS119 – X R564 C546 C530 C530 C530 C530 R567 R567 R567 R567 R529 R529 R529 R529 R565 R565 R565 R565 R445 R445 R445 R445 IC501 IC501 IC501 IC501 R225 R225 R403...

  • Page 17: Circuit Adjustments

    KV-13FM13 / 13FM14 SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y172) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-2.
  • Page 18 KV-13FM13 / 13FM14 ADJUSTMENT ITEMS (1 OF 2) ,7(0 )81&7,21 5$1*( ),; '$7$ 176& 3$/ 0 3$/ 1 9,'(2 $9(5$*( '$7$  +6,= +RUL]RQWDO 6L]H $GMXVWPHQW   +326 +RUL]RQWDO 3RVLWLRQ $GMXVWPHQW   9%2: 9HUWLFDO /LQH %RZLQJ $GM ...
  • Page 19 KV-13FM13 / 13FM14 ADJUSTMENT ITEMS (2 OF 2) ,7(0 )81&7,21 5$1*( ),; '$7$ 176& 3$/ 0 3$/ 1 9,'(2 $9(5$*( '$7$  966 9HUWLFDO 6\QF 6OLFH /HYHO  +66 +RUL]RQWDO 6\QF 6OLFH /HYHO  +06. )RU 0DFUR 9LVLRQ  9706 6HOHFW 6LJQDO 97,0 3LQ  &'0' 9HUWLFDO &RXQW 'RZQ 0RGH 6ZLWFKLQJ...

  • Page 20: Display Position Adjustment

    KV-13FM13 / 13FM14 DISPLAY POSITION ADJUSTMENT 4-4. MB BOARD ADJUSTMENTS (DISP) H. FREQUENCY (FREE RUN) CHECK 1. Input a color-bar signal. 1. Input a TV mode (RF) with no signal. 2. Set to Service Adjustment Mode. 2. Connect a frequency counter to base of Q501 3.

  • Page 21: Service Adjustment Mode Memory

    KV-13FM13 / 13FM14 5. Press MUTING then ENTER to save into the memory. 5. Press MUTING then ENTER to save into the memory. V LINEARITY (VLIN) V. CENTER ADJUSTMENT (VPOS) V CORRECTION (VSCO) Perform this adjustment after performing H. Frequency (Free Run) Check.

  • Page 22: Diagrams

    KV-13FM13 / 13FM14 SECTION 5: DIAGRAMS 5-1. CIRCUIT BOARDS LOCATION The components identiÞ ed by shading and symbol are critical for safety. Replace only with part number speciÞ ed. Board The symbol indicates a fast operating fuse and is displayed on the component side of the board.
  • Page 23 KV-13FM13 / 13FM14 5-3 DIAGRAMS BLOCK DIAGRAM(1/2) — 23 —...
  • Page 24 BLOCK DIAGRAM (2/2) KV-13FM13 / 13FM14 — 24 —...
  • Page 25 KV-13FM13 / 13FM14 [POWER SUPPLY, DEFLECTION, TUNER/IF, AUDIO, MTS] A BOARD LOCATOR LIST — $ %2$5' /2&$725 /,67 ',2'( ' ' ' & ' % ' ' % ' ' % ' — ' ' ' ' ' ' '...
  • Page 26 KV-13FM13 / 13FM14 A BOARD IC BLOCK DIAGRAMS A BOARD: IC401 TDA7057AQ/N2 I + i Positive Output 1 Input 1 DC Volume Control 1 – I – i Negative Output 1 TEMPERATURE STABILIZER PROTECTION I + i Positive Output 2...
  • Page 27 KV-13FM13 / 13FM14 A BOARD IC VOLTAGE LIST $ %2$5' ,& 92/7$*( /,67   ,& YROW ,&    YROW ,&  YROW  ,&    YROW ,& ,& ,& YROW YROW YROW  ,& ...

  • Page 28: A Board Schematic Diagram

    KV-13FM13 / 13FM14 A BOARD SCHEMATIC DIAGRAM A BOARD WAVEFORMS 1.08 KVp-p (H) 30.4 Vp-p (V) 2.5 Vp-p (H) 182.8 Vp-p (H) 23.4 Vp-p (H) 54.3 Vp-p (V) 5.0 Vp-p (V) 174.3 Vp-p (H) 31.1 Vp-p (V) — 28 —...
  • Page 29 KV-13FM13 / 13FM14 MB BOARD SCHEMATIC DIAGRAM MB BOARD WAVEFORMS 4.7 Vp-p (H) 2.7 Vp-p (8 MHz) 1.0 Vp-p (H) 4.0 Vp-p (V) 4.0 Vp-p (V) 0.9 Vp-p (H) 1.7 Vp-p (H) 1.4 Vp-p (V) 1.4 Vp-p (V) 5.5 Vp-p (H) 5.3 Vp-p (H)
  • Page 30 KV-13FM13 / 13FM14 MB BOARD IC VOLTAGE MB BOARD TRANSISTOR VOLTAGE 0% %2$5' 75$16,6725 92/7$*( /,67 ,& ,& 4 4 4 4 4 4 YROW YROW YROW YROW YROW YROW YROW YROW & & & & & & 4 4...
  • Page 31 KV-13FM13 / 13FM14 [TUNING CONTROL. Y/C/J] — — — — — — MB BOARD LOCATOR LIST MB BOARD LOCATOR LIST DIODE D1013 IC1302 Q1010 Q1311 Q1327 Q1354 CRYSTAL D1001 D1014 IC1304 Q1011 Q1312 Q1328 D1003 D1301 IC1305 Q1301 Q1313 Q1329...
  • Page 32 KV-13FM13 / 13FM14 MB BOARD IC BLOCK DIAGRAMS MB BOARD: IC1301 CXA2131AS EYUV CLAMP <FSC SW> ABL FIL YUV SW <YSEL> YUVOUT ABL IN <YUVOUT> DEMOD. C VCO <HUE> ABL/PEAK LIM DPIC CLAMP <ABL MODE> IK IN <DPIC> COLOR AMP RGB 1/2 <<IKR>>...
  • Page 33 KV-13FM13 / 13FM14 CB BOARD SCHEMATIC DIAGRAM — 33 —...
  • Page 34 KV-13FM13 / 13FM14 [CRT DRIVE, RGB DRIVE] — — — — CB BOARD WAVEFORMS 132.8V p-p (H) 135.9V p-p (H) 140.6V p-p (H) — 34 —...

  • Page 35: Hc Board Schematic Diagram

    KV-13FM13 / 13FM14 HC BOARD SCHEMATIC DIAGRAM [IR-DETECT/POWER SWITCH FUNCTION SWITCHES] — 35 —...

  • Page 36: Hd Board

    KV-13FM13 / 13FM14 HD BOARD SCHEMATIC DIAGRAM [MENU SWITCHES, FRONT A/V INPUT] — — 36 —...

  • Page 37: Semiconductors

    KV-13FM13 / 13FM14 5-4. SEMICONDUCTORS 2SB709A-QRS-TX 2SC3209LK-TP 2SC331740S-QRT D2SB60A-F04 D5LC20U 2SD601A-QRS-TX 2SC2412K-T-146-QR 2SA1837 2SA1091Q-TPE2 2SK2845-LB102 DAP202K-T-146 RD9.1EW-T1 2SC4159-E 2SA993SA-QRT D4SB60L-F 1SS133T-77 ERC06-15S 1SS83TD 2SA1309A-QRT MTZJ-T-77-5.1C D1N20R-TA D1NL20R-TA 2SC3311A-QRSTA MTZJ-T-775.6C EL1Z-V1 2SD2144S-TP-UVW D1NS4-TA MTZJ-T-77-7.5A ERA22-08TP3 MTZJ-T-7712C MTZJ-T-77-8.2B GP08DPKG23 MTZJ-T-77-39 MTZJ-T-77-10B RGP10GPKG23 RD8.2ES-T1B...

  • Page 38: Exploded Views

    [Assembly Includes] 18 * A-1299-219-A A BOARD, COMPLETE X-4037-635-2 BEZNET ASSY (KV-13FM13 only) 2-5 The high-voltage leads associated with the FBT on this board X-4037-632-2 BEZNET ASSY (KV-13FM14 only) 2-5 are not included and must be ordered separately. (See 23-25) 3-704-176-61 EMBLEM (NO.6), SONY...

  • Page 39: Electrical Parts List

    KV-13FM13 / 13FM14 SECTION 7: ELECTRICAL PARTS LIST NOTE: The components identiÞ ed by shading RESISTORS The components in this manual identiÞ ed by the following mark are critical for safety. Replace only • All resistors are in ohms symbol: indicate parts that have been carefully factory- with part number speciÞ...
  • Page 40 KV-13FM13 / 13FM14 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e.
  • Page 41 KV-13FM13 / 13FM14 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e.
  • Page 42 KV-13FM13 / 13FM14 A component identiÞ ed by this symbol indicates that it NOTE: The components identiÞ ed by shading has been carefully factory-selected to satisfy regulations mark are critical for safety. Replace only regarding X-ray radiation. Should replacement be required, with part number speciÞ...
  • Page 43 KV-13FM13 / 13FM14 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e.
  • Page 44 KV-13FM13 / 13FM14 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES C1055 1-163-229-11 CERAMIC CHIP 12pF C1349 1-163-021-91 CERAMIC CHIP 0.01µF C1056 1-163-009-11 CERAMIC CHIP 0.001µF 10% C1350 1-163-021-91 CERAMIC CHIP 0.01µF C1058 1-163-009-11 CERAMIC CHIP 0.001µF 10%...
  • Page 45 KV-13FM13 / 13FM14 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e.
  • Page 46 KV-13FM13 / 13FM14 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES R1045 1-216-065-91 RES-CHIP 4.7K 1/10W R1106 1-216-073-00 RES-CHIP 1/10W R1046 1-249-425-11 CARBON 4.7K 1/4W R1109 1-216-073-00 RES-CHIP 1/10W R1047 1-216-065-91 RES-CHIP 4.7K 1/10W R1110 1-216-059-00 RES-CHIP 2.7K...
  • Page 47 KV-13FM13 / 13FM14 MB CB NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e.
  • Page 48 KV-13FM13 / 13FM14 CB HC HD REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES RESISTOR COIL R2201 1-249-415-11 CARBON 1/4W L701 1-408-613-31 INDUCTOR 68µH R2202 1-249-416-11 CARBON 1/4W R2203 1-249-421-11 CARBON 2.2K 1/4W TRANSISTOR R2204 1-249-427-11 CARBON 6.8K...
  • Page 49 CUSHION ASSY, UPPER 4-075-183-04 CARTON, INDIVIDUAL 4-075-509-21 MANUAL, INSTRUCTION(English) 4-075-509-31 MANUAL, INSTRUCTION(French) REMOTE COMMANDER 1-418-854-11 REMOTE COMMANDER (RM-Y172) (KV-13FM13 only) 1-476-231-11 REMOTE COMMANDER (RM-Y172) (KV-13FM14 only) 3-709-322-11 COVER, BATTERY (KV-13FM14 only) 3-709-322-21 COVER, BATTERY (KV-13FM13 only) Sony Corporation English Sony Technology Center...
  • Page 50 A BOARD SCHEMATIC DIAGRAM...
  • Page 51 KV-13FM13 / 13FM14...
  • Page 52 — 28 —...
  • Page 53 A BOARD WAVEFORMS 30.4 Vp-p (V) 1.08 KVp-p (H) 2.5 Vp-p (H) 182.8 Vp-p (H) 23.4 Vp-p (H) 54.3 Vp-p (V) 5.0 Vp-p (V) 174.3 Vp-p (H) 31.1 Vp-p (V)
  • Page 54 MB BOARD SCHEMATIC DIAGRAM...
  • Page 55 KV-13FM13 / 13FM14 MB BOARD WAVEFORMS 4.7 Vp-p (H) 2.7 Vp-p (8 MHz) 1.0 Vp-p (H) 4.0 Vp-p (V) 4.0 Vp-p (V) 0.9 Vp-p (H) 1.7 Vp-p (H) 1.4 Vp-p (V) 5.5 Vp-p (H) 5.3 Vp-p (H) 1.4 Vp-p (V) 3.8 Vp-p (H)
  • Page 56 — 29 —...
  • Page 58 Connecting Additional Equipment 4-075-509-21 Trinitron Color TV ® Operating Instructions KV-13FM12 KV-13FM13 KV-13FM14 KV-20FS12 © 2000 by Sony Corporation...
  • Page 59 User Guide...

  • Page 60: Safety Precautions

    Connecting Additional Equipment WARNING To reduce the risk of fire or electric shock, do not expose the TV to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • Page 61 The model and serial numbers are located on the front cover of this manual and the rear of your TV. Trademarks and Copyrights ® ENERGY STAR is a registered mark. ® As an E Partner, Sony has determined that this product or product NERGY ® model meets the E guidelines for energy efficiency. NERGY...

  • Page 62: Important Safeguards

    Connecting Additional Equipment Important Safeguards For your protection, please read these instructions completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions placed on the set, or described in the operating instructions or service manual. WARNING To guard against injury, the following basic safety precautions should be observed in the installation, use, and servicing of the set.
  • Page 63 User Guide Overloading Cleaning Do not overload wall outlets, extension Unplug the set from the wall outlet before cords or convenience receptacles beyond cleaning or polishing it. Do not use liquid their capacity, since this can result in fire or cleaners or aerosol cleaners.
  • Page 64 Connecting Additional Equipment Accessories • Never place the set in a confined space, such as a bookcase, or built-in Do not place the set on an unstable cart, cabinet, unless proper ventilation is stand, tripod, bracket, table, or shelf. The provided.
  • Page 65 User Guide Grounding or Polarization This set may be equipped with a polarized alternating current line plug (a plug having one blade wider than other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
  • Page 66 Connecting Additional Equipment Service • When the set exhibits a distinct change in performance — this Damage Requiring Service indicates a need for service. Unplug the set from the wall outlet and refer servicing to qualified service Servicing personnel under the following conditions: Do not attempt to service the set yourself •...
  • Page 67 User Guide...
  • Page 68 Contents Introduction ® Trinitron Color TV Features ......1 Batteries for the Remote Control....... 2 About this Manual ..........2 Connecting Your TV Basic Connections..........3 Connecting Additional Equipment ....4 Using the Remote Control and Basic Functions Using the Remote Control........ 11 Setting Up the TV Automatically....
  • Page 69 User Guide...

  • Page 70: Trinitron Color Tv Features

    Connecting Additional Equipment Introduction ® Congratulations on your purchase of the Sony Trinitron Color TV. Before you begin using this manual, please check the model number located on the rear of your TV or on the front cover of this manual.

  • Page 71: Batteries For The Remote Control

    Operating Instructions Batteries for the Remote Control Insert two AA (R6) batteries (supplied) into the remote control using the following illustration as a guide. ✍ Under normal conditions, batteries will last up to six months. If the remote control does not operate properly, the batteries might be worn out. ✍...

  • Page 72: Connecting Your Tv

    Connecting Your TV Connecting Your TV Read this section before setting up your TV for the first time. This section covers basic connections in addition to any optional equipment you may be connecting. Basic Connections TV with indoor or outdoor antenna, or CATV cable Depending on the cable available in your home, choose one of the connections below: ✍...

  • Page 73: Connecting Additional Equipment

    Operating Instructions Connecting Additional Equipment TV and VCR Rear of TV Coaxial Cable From cable/ antenna (Optional connection) Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
  • Page 74 Connecting Your TV TV and Cable Box Cable Box Coaxial Cable From cable Coaxial Cable Rear of TV Connect the coaxial cable from your cable service to the IN jack on your cable box. Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the VHF/UHF jack on the TV.
  • Page 75 Operating Instructions TV, VCR, and Cable box Rear of TV Cable Coaxial Cable (Optional connection) From cable Connect the coaxial cable from your cable service to the IN jack on your cable box. Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack on your VCR.
  • Page 76 Connecting Your TV TV and Satellite Receiver Rear of TV From cable/ antenna Satellite receiver SATELLITE IN VHF/UHF AUDIO R AUDIO L VIDEO Satellite antenna LINE OUT cable Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV.
  • Page 77 Operating Instructions TV, Satellite Receiver, and VCR Satellite antenna cable Rear of TV From cable/ antenna SATELLITE IN VHF/UHF AUDIO R A UDIO L VIDEO AUDIO R A UDIO L VIDEO VHF/UHF LINE IN LINE OUT Satellite receiver LINE OUT Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.

  • Page 78: Connecting A Camcorder

    Connecting Your TV Connecting a Camcorder Using A/V cables, connect AUDIO and VIDEO OUT on your camcorder to AUDIO and VIDEO IN on your TV. Front A/V Panel VIDEO 2 INPUT MENU VIDEO L(MONO)-A UDIO-R A/V output Connecting a DVD Player Using A/V cables, connect AUDIO and VIDEO OUT on your DVD player to AUDIO and VIDEO IN on your TV.

  • Page 79: Connecting Headphones

    Operating Instructions Connecting Headphones Connect your headphones to the jack on the front of your TV. Front A/V Panel...

  • Page 80: Using The Remote Control And Basic Functions

    Using the Remote Control and Basic Functions Using the Remote Control and Basic Functions This section shows you how to use the more advanced buttons on the remote control and how to use the on-screen menus. Using the Remote Control Button Description POWER...
  • Page 81 Operating Instructions MENU Displays the on-screen menu. Press again to exit the menu at any time. Press to return to factory settings RESET while in an on-screen menu. ✍ If you lost your remote control, see page 30.

  • Page 82: Setting Up The Tv Automatically

    Using the Remote Control and Basic Functions Setting Up the TV Automatically After you have finished connecting your TV, you can perform Auto Program to set up your channels. Press to turn on the TV. The Initial Setup screen appears. Auto Program [CH+] EXIT...

  • Page 83: Quick Start To The Menus

    Operating Instructions Quick Start to the Menus The following settings are available in your on-screen menus: Menu Allows you to Make adjustments to your picture settings. Video Picture Brightness Color Sharpness VM: Low MENU Move Select Change your Multi-channel TV Sound settings (KV-20FS12 only).
  • Page 84 Using the Remote Control and Basic Functions Menu Allows you to Set the clock on your TV and program scheduled viewing using Timer 1 and Timer Timer 2. Timer 1: Set Timer 2: Set Current Time Daylight Saving: --:--AM MENU Move Select Options...

  • Page 86: Using The Menus

    Using the Menus Using the Menus This section shows the options available for setting up and adjusting your TV. To access a menu MENU Press Use the G or g buttons to move through the menus. Use the F or buttons to highlight an option.

  • Page 87: Using The Audio

    Operating Instructions Using the Audio Menu (KV-20FS12 only) To access the Audio menu, see “To access a menu” on page 17. Audio MTS: Stereo MENU Move Select Press to select one of the following options: Multi-Channel Stereo: Select when viewing a broadcast in stereo. Sound Mono: Select to reduce noise in areas of poor reception.

  • Page 88: Using The Channel Setup Menu

    Using the Menus Using the Channel Setup Menu To access the Channel Setup menu, see “To access a menu” on page 17. Channel Setup Favorite Channel Channel Fix: OFF Channel Skip/Add Channel Label MENU Move Select Favorite With the Favorite Channel menu open: 1 Press g or to select.

  • Page 89: Parental Control

    Operating Instructions Parental Control The Parental Control feature is designed to help parents monitor what their children watch on television. This section shows you the different rating systems available and how to set your TV’s rating limit. Overview of the Ratings Once you have become familiar with these rating systems, you should be ready to set your TV’s rating limit.

  • Page 90: Movie Ratings

    Using the Menus Movie Ratings (U.S. models only) This system defines the rating levels of movies shown in theaters and on prime cable channels. Rating Defined as Movie Ratings General audience Parental Guidance PG-13 suggested NC-17 Parents strongly PG-13 cautioned Press to block MENU...
  • Page 91 Operating Instructions English Ratings (Canadian models only) These ratings are for Canadian programs that are broadcast in English. Rating Defined as English Ratings Children Children 8 years and older General programming Parental Guidance Press to block MENU Move Select Viewers 14 and older Adult programming French Ratings (Canadian models only)

  • Page 92: Using The Parental Control Menu

    Using the Menus Using the Parental Control Menu To access the Parental Control menu, see “To access a menu” on page 17. Parental Control Password: ---- Use [0-9] buttons to enter new four-digit Password MENU Move Select In the Parental Control menu, you will be asked to set a 4-digit password for any further access into Parental Control.
  • Page 93 Operating Instructions Setting the rating You can change the Rating by selecting one of the Lock options. Parental Control Lock: OFF Change Password MENU Move Select Move the cursor to Lock and press If you are not familiar with the Parental Guidelines rating system, use one of the following preselected categories to simplify the rating selections: OFF, Child, Youth, Young Adult, or Custom.

  • Page 94: Changing Your Password

    Using the Menus Using the Custom Menu Before setting Custom ratings, see pages 20-22, “Overview of the Ratings,” for a description of the available rating systems. Follow the instructions on the screen to make your custom settings. See page 21 for U.S. models and page 22 for Canadian models for more information.

  • Page 95: Using The Timer Menu

    Operating Instructions Using the Timer Menu To access the Timer menu, see “To access a menu” on page 17. Timer Timer 1: Set Timer 2: Set Current Time Daylight Saving: --:--AM MENU Move Select Timer 1 and With the menu open, highlight Timer 1 or Timer 2: 1 Press g or , then press g or again.

  • Page 96: Using The Setup Menu

    Using the Menus Using the Setup Menu To access the Setup menu, see “To access a menu” on page 17. Setup Caption Vision: CC1 Video Label Language: English Demo Options MENU Move Select Press F or Caption to select one of the following options: Vision CC1, 2, 3, 4: Displays printed dialogue and sound effects of a Closed-...

  • Page 97: Options Menu

    Operating Instructions Options Menu To access the Options menu, see “To access a menu” on page 17. Options Cable: ON Auto Program Tilt Correction: 0 MENU Move Select Cable ON: Select if you are receiving cable channels with a CATV cable.

  • Page 98: Other Information Troubleshooting

    Other Information Other Information Troubleshooting If you are having a problem with your TV, try the suggestions below. If the problem persists, contact your nearest Sony dealer. ❏ No picture, no Make sure the power cord is plugged in. sound ❏...
  • Page 99 Sony dealer to order a replacement. If, after reading these Operating Instructions, you have additional questions related to the use of your Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents only) or (416) 499-SONY (7669) (Canadian residents only).

  • Page 100: Specifications

    KV-13FM13, KV-13FM14) RM-Y173 (1) (KV-20FS12) Optional Accessories Connecting cables VMC-810S/820S, VMC-720M, YC-YC-15V/30V, RK74A EAC-66 U/V mixer KV-13FM12, KV-13FM13, KV-13FM14 Screen size Visible screen size: 13 inches (330 mm) measured diagonally Actual screen size: 14 inches (356 mm) measured diagonally Inputs/outputs...

  • Page 101: Index

    User Guide Operating Instructions Index Menus Audio Channel Setup Parental Control Audio menu Setup 13, 28 Auto Program Timer Auto-SAP Video Mono Battery Installation Brightness Auto-SAP Mono Cable Stereo Caption Vision Channel Fix Options menu Channel Label Overview of the Ratings Channel Setup menu Color...
  • Page 102 Index...
  • Page 105 Connecting Additional Equipment Sony Corporation Printed in USA...

  • Page 106: Schematic Diagrams

    PRINTING THE SERVICE MANUAL The PDF of this service manual is not designed to be printed from cover to cover. The pages vary in size, and must therefore be printed in sections based on page dimensions. NON-SCHEMATIC PAGES Data that does NOT INCLUDE schematic diagrams are formatted to 8.5 x 11 inches and can be printed on standard letter-size and/or A4-sized paper. SCHEMATIC DIAGRAMS The schematic diagram pages are provided in two ways, full size and tiled.
  • Page 107 ON-SCREEN SEARCH OPTION All of the text within the service manual PDF is content searchable. This means that you can enter any text, word, phrase or reference number that appears in the manual, and the PDF software will search, fi nd and move the cursor to the location where you requested text fi rst appears. This feature can be particularly useful in locating components on a specifi...

This manual is also suitable for:

Kv-13fm14

Table of Contents