Boot; Security - MSI Z97M-G43 User Manual

Micro-star motherboard
Hide thumbs Also See for Z97M-G43:
Table of Contents

Advertisement

▶ Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Disables or enables the system wake up by PS/2 keyboard.
[Any Key]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled]
Disables this function.

Boot

Sets the sequence of system boot devices.
▶ Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled]
The OS boots straight to the GUI without showing the POST screen.
[Disabled]
Shows the POST messages at booting.
▶ GO2BIOS [Disabled]
Enables or disables the system to power on and go to the BIOS setup directly by long
pressing the power button about 4 seconds when the system is off.
[Enabled]
The system boots straight to the BIOS setup by long pressing the power
button about 2~4 seconds when the system is off.
[Disabled]
Disables this function.
▶ Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS in-
stallation requirement. This item will become unselectable and will be configured
automatically by BIOS when "Windows 8/ 8.1 Feature" is enabled.
[UEFI]
Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI]
Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.
▶ FIXED BOOT ORDER Priorities
Sets device priority for system boot.
▶ Boot Option #1~N
These items are used to prioritize the installed boot devices.

Security

▶ Administrator Password
Sets administrator password for system security. Enters the administrator password if
set; user has full rights to change the BIOS items.
▶ User Password
Sets User Password for system security. Enters the user password if set; but user
might have limited rights to change the BIOS items.
Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
BOIS Setup
3-16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H97m-g43

Table of Contents