Sony RM-B750 Operation Manual page 19

Menu 2ndary menu
RM Config Date/Time
(Continued) (Continued)
SW Setting
Cable Comp
VR Setting
Information
Security
V-Posi
LCD LCD Brightness
File Reference File Store
Reference File Transfer
Scene File Transfer
OHB File Store
Super Motion Field Rate
Frame Interpolation
Flicker Reduction
Memory Stick Memory Stick
1) Selectable only in Engineer Mode
2) Engineer Mode will be canceled when you turn off the unit.
Submenu Control item
Time Hour
z
Minute
z
Second
z
Set
Cancel
Active Mode Setting Active Mode
TEST TEST Mode
1)
VTR S/S VTR/CALL
1)
Function SW VTR Ctrl/CAM Ctrl
1)
VF Menu Control Enable
Length
White R/B ABS/REL
Scale
Black R/B ABS/REL
Scale
Master Black ABS/REL
Scale
IRIS ABS/REL
Min
z
Max
z
Engineer Mode
Control Enable
Bright
z
CAM t MS
MS t CAM
CAM t MS
MS t CAM
[ x1, x3 ]
[ OFF, A, B, C ]
[ OFF, Normal, Strong ]
Format
Function
Adjusts the time for the built-in clock of this unit.
Switches the mode of the PANEL ACTIVE button.
Mode 2: FULL/LOCK
Mode 3: FULL/PART/LOCK.
Select the signal to be output when pressing the TEST
button (Saw, 3STEP, 10STEP).
Switches between VTR and CALL functions of the VTR
START/STOP button.
Switches between VTR playback control functins and camera
control functions for the VTR playback control buttons.
Enables camera menu control from this unit.
Sets the cable compensation value when using video signals.
Switches between Absolute and Relative modes for manual
white adjustment.
Selects the variable range of the white level in relative mode
(1/1, 1/2, 1/4).
Switches between Absolute and Relative modes for manual
black adjustment.
Sets the variable range of the black level in Relative mode
(1/1, 1/2, 1/4).
Switches between Absolute mode and Relative mode for
master black adjustment.
Selects the variable range of the master black level in
Relative mode (1/1, 1/2, 1/4).
Switches between Absolute mode and Relative mode for
manual iris adjustment.
Sets the minimum iris level.
Sets of the maximum iris level.
Displays the software version of this unit.
2)
Sets the unit to Engineer Mode.
Enables the function to adjust the vertical position of
characters and picture on the viewfinder.
Adjusts the brightness of the LCD of this unit.
Stores a reference file.
Transfers a reference file (from a camera to a Memory
Stick).
Transfers a reference file (from a Memory Stick to a
camera).
Transfers a scene file (from a camera to a Memory Stick).
Transfers a scene file (from a Memory Stick to a camera).
Stores a OHB file.
Sets the field rate when using a Super-Motion camera.
Sets the pattern to make the reference output picture in
3-times mode
Sets the flicker suppression in 3-times mode.
Formats a Memory Stick.
19(E)