Sony RM-B750 Operation Manual page 12

Menu Configuration and Basic Menu Operations
Monitor output set display (Expansion menu)
[WF/PIX Select]
When you press
display of the Paint menu, the upper half of the panel
becomes the monitor output setting display.
Press again to return to
the previous display.
Scene File Operation menu display
When you press and light the SCENE button of the
menu operation block, the Scene File Operation menu
display is obtained.
To recall a scene file:
Press the number of the desired
scene file, and the settings stored
in the corresponding scene file
will be retrieved.
The color of the number of the
retrieved file changes.
When you press the same
number again, the previous
condition will be restored.
12(E)
on an adjustment
WF/PIX Monitor Select
R G B RGB SEQ
WF/PIX
Select
Scene File Recall
1 2 3 4
R/G/B: To independently select the R,
G, or B signal.
ENC
RGB: To select the R, G, and B signals
in combination.
SEQ: Only the WF output is enabled,
and you can monitor the waveforms of
the R, G, and B signals in sequence.
ENC: The encoded signal is output.
To store the current settings
in a scene file:
Store
First press and light [Store], then select
the desired scene file number.
5
When file registration is finished, [Store]
returns to its original color.